As its name implies, a sliding gate either slides on wheels from left to right or right to left. Sliding gate operators are commonly installed at the end of the gate in the closed position but can also be installed by the end of the gate in the open position. A metallic rack is attached to the gate with a gear fitted to the operator. This ensures a quieter and more secure system. The operator is equipped with smooth gear and logic controller thus providing the flexibility of various logics which can be built in. Sliding gates are often large, heavy and therefore a heavy duty operator is designed due to its operational environment. Suitable safety devices can also be attached making them suitable for both industrial & residential use.
A gate operator is a mechanical device used to open and close a gate, such as one at the end of a driveway. There are two main types of electric gate openers – hydraulic or electromechanical; these can be further split into the following categories, worm (or screw) driven, arm openers, underground openers and Roller Wheel Type Openers. Automatic and Electric Gate operators are designed for both swinging and sliding gates. They can be programmed to open and close with a wireless transmitter or a manual device. Low Voltage Automatic Gate openers can also be fitted with solar panels to ensure function during loss of electricity or blackouts.
Operator Types:
Mechanical
Operators generally draws power from the mains to open a driveway. Generally there are four types of electromechanical gate operator: Worm driven (or screw type) swing gates, barrier arm operators and sliding operators Electric and automatic gate openers are designed for both sliding and swinging gates. They can be programmed to open with a manual device or a wireless transmitter. Automatic gate operators can also be fitted with solar panels to operate without high voltage power. Battery backup can also be either integrated or as an add on to systems that ensure function during loss of electricity.
Hydraulic
As the name implies they use hydraulic fluids to operate their motion. Typically hydraulic operators have less moving parts than mechanical operators. The hydraulic motors have a number of advantages when operating gates: they are capable of producing more power than mechanical motors for heavy sized barriers and do not have to work at full power when operating large gates. Drawbacks of using hydraulic operated barriers are caused because of the technology itself, being under pressure, they tend to be harder to handle and less safe. Maintenance also is very critical in these types of operators.
These Sliding Gate are very Well made in India.
Sliding Gate are designed, developed and manufactured in India.
Sliding Gate are CE Certified and meets hence International Standard.